Free-space and on-metal dual-band tag for UHF-RFID applications in Europe and USA

F. Paredes, G. Zamora, S. Zuffanelli, F.J. Herraiz-Martínez, F. Martín, J. Bonache

Progress In Electromagnetics Research Vol. 141, pp. 577 - 590

Resumen:

In this paper, we present an UHF-RFID tag mountable on metallic surfaces and capable to operate in the assigned frequency bands in Europe (866-869 MHz) and USA (902-928 MHz). Due to the proximity of these frequency bands, the dual-band functionality can be achieved through a perturbation method applied to a single band tag designed to operate at the intermediate frequency. The tag consists of an integrated circuit, an impedance matching network (where the perturbation method is applied) and a patch antenna. The considered antenna has been chosen because it has high efficiency over metallic surfaces. The whole tag has been analyzed, designed and finally fabricated. The read ranges measured in free-space are 9.5 m and 7.5 m at the European and USA frequency bands, respectively. By placing the tag on a metal surface, the read ranges increase up to 14 m and almost 11 m, respectively.

Índice de impacto JCR y cuartil WoS: 6,100 - Q1 (2023)

Referencia DOI: https://doi.org/10.2528/PIER13051312

Publicado en papel: Agosto 2013.

Publicado on-line: Agosto 2013.

Cita:
F. Paredes, G. Zamora, S. Zuffanelli, F.J. Herraiz-Martínez, F. Martín, J. Bonache, Free-space and on-metal dual-band tag for UHF-RFID applications in Europe and USA. Progress In Electromagnetics Research. Vol. 141, pp. 577 - 590, Agosto 2013. [Online: Agosto 2013]